How is a house made of logs

The construction of a wooden house is a difficult and very responsible business. Our article will reveal several nuances that will help to successfully cope with such a task as turnkey house.

It is recommended to take coniferous or deciduous wood wood as a building material. The best solution would be the use of wood, which was prepared in winter, since during the cold the movement of juice inside the tree ceases, and it becomes more dense and solid.

Since we are talking about the construction of a house from a galinded log, expect that the thickness of the walls should be at least 200 mm. Only with such walls it will be comfortable in our climate.

The advantage of the galinded log is a flat, rounded form, which allows you to achieve a tight connection. Also, such material is less deformed in the process of natural drying. The length of the log varies between 160-260 mm; It all depends on local conditions.

Laying logs should be carried out according to all the rules. It is carried out on an lap -fiber or environmentally friendly dad. According to this technology, after a complete natural shrinkage and shrinkage passes, it is necessary to make a repeated hemp. With this action we close the emerging intergular spaces. This technology has passed the test of time and has proven itself well. If everything is done correctly, the house will “breathe”, but the drafts will not be. The only warning: in no case do not use synthetic materials.

After the tree has been cut down in the forest, it undergoes preparatory processing, for which the antiseptic based on natural components is used. This procedure is environmentally friendly. However, after you erect a house, the external walls should be opened with an additional antiseptic – it will protect the tree from the pernicious effect of moisture. If you want to give the wall some shade, you can add pigments to the antiseptic. It will be beautiful and protect the walls from burnout to the sun.

Installation of electrical wiring is an important question that requires professional performance. It is produced inside the wooden walls and under the floors. The cross section of the voltage wires must be selected with a margin after the theoretical power of the voltage was calculated. For electrical wiring in a wooden house, you can use only a copper wire in a double braid. It is recommended to do the roof with bitumen tiles.

And you can learn more about the house from the beam here/Kleenogo-brusa.